When irrigating upside-down in greenhouses or net-houses or tunnels, SpinNetTM bridgeless micro-sprinklers give you uniform water distribution and no drip-off, for perfectly uniform crop yields.
HIGH UNIFORMITY AND GERMINATION RATES: The uniform droplets are perfectly sized and distributed to guarantee effective germination.
SELF-CLEANING: ?Vibration? mechanism prevents the build-up of mineral deposits in the nozzle ? reducing the need for maintenance and repairs.
HARD-WEARING: Micro-emitters are made from materials resistant to abrasive agrochemicals and harsh weather conditions.
SpinNetTM micro-sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation. This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. SpinNetTM hangs below the supply pipe preventing wetting of the pipe and dripping onto the plants below.
Interchangeable components. SpinNetTM micro-sprinklers can be disassembled by hand should they need cleaning - no tools are required.
Acid-resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by the application of suitable acid treatments.
Excellent uniformity distribution on a full coverage irrigation system.
Strongly recommended connecting the SpinNetTM to the distribution pipe with an SSPE (super soft PE) micro-tube, a specifically designed stabilizer, and AD valve (anti-drain) that will prevent distribution pipe drainage.
- Bridgeless design.
- Micro-sprinkler, 6 different flow rates: 50, 70, 90, 120, 160, 200 l/h. Nominal flow rates at 2.3 bar pressure.
- Recommended working pressure: 2.0 up to 3.0 bar.
- Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydro-cyclone filter is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions.
- Inlet connector: Press fit.
- 3 different rotors: LR - High trajectory, colored Green FLT - Flat distributor, colored Gray SR - Low trajectory , colored Blue
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
