Product Description
Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where medium work time is desired.Features
- Duplicates factory appearance
- Can be used with or without primer
- Extended work time
- Substrates: Bare Metal or Primed surfaces
Specifications
| Part No. | 90986 |
|---|---|
| Product Line | FUS |
| Standard/Approvals | Honda/Acura |
| Application | truck bed, tooled door skin, floor pan and core support seams |
| Manufacturer | LORD Fusor Adhesives |
| Alternate Part Number-1 | 90986 |
| UPC | 666233909864 |
| Brand | Fusor® |
| Part Status | O |
| Applicable Materials | Bare Metal or Primed surfaces |
| Composition | 55 to 60% Epoxy Resin, 15 to 20% Alkyl Phenol Blocked Polyisocyanate, 10 to 15% Epoxy Resin, 5 to 10% Epoxy Resin, 1 to 5% Alkyl (C12-14)Glycidyl Ether, 1 to 5% Amide, 0.1 to 0.9% 4-Nonyl Phenol, 0.1 to 0.9% Epoxy Resin (Part A), 1 to 5% Amine Compound, 1 to 5% Amide (Part B) |
| Application Time | 15 min at 70 deg F |
| Paintable (Y/N) | Y |
| Sprayable (Y/N) | N |
| Component | 2K |
| Color | White |
| Flash Point | 201 deg F |
| Container Size (oz) | 7.1 |
| Container Type | Cartridge |
| Form | Paste |
| Type | 2-Part, Medium |
| Curing Time | 36 hr at 70 deg F |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
