The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.
- Maximize dispense time while minimizing maintenance costs and effort
- Delivers precise, consistent dispensing with clean starts and stops
- Ideal for low to high viscosity materials
- Elite seal and hardened components extends life with abrasive materials
- Easy repeatable mounting for robotic and automated applications.
- 60mm nozzle is compatible with 60mm focal length vision systems
UPC Product: 00769946270907
Family Code: FAMIQV
Unit of Measure: EA
Height: 0 CM | 0 IN
Length: 0 IN | 0 CM
Width: 0 IN | 0 CM
Volume: 0 FT3 | 0 M3
Chargeable Weight: 0 LBS | 0 KG
Technical Specifications
| Maximum Air Pressure (bar) | 8.3 |
|---|---|
| Maximum Air Pressure (psi) | 120 |
| Maximum Operating Temperature (?C) | 70 |
| Maximum Operating Temperature (?F) | 158 |
| Power Rating (W) | 75 |
| Voltage (V ac) | 240 |
| Weight (lb) | 2.4 |
| Wetted Material | Aluminum, UHMWPE, 17-4 Stainless Steel, PEEK, Chemical Resistant O-Rings, CA 360 Brass, Coated Tool Steel, 440C Stainless Steel |
| Air Inlet Size (in) | 1/8 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Ambient/Warm Melt/Hot Melt | Warm Melt |
| Applicator Type | Tip-Seal |
| Component Type | Single Component |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Gun Activation | Automatic |
| Maximum Air Pressure (MPa) | 0.83 |
| Maximum Fluid Pressure (bar) | 276 |
| Maximum Fluid Pressure (MPa) | 28 |
| Maximum Fluid Pressure (psi) | 4000 |
| Mount Location | Remote Mount Solenoid |
| Nozzle Size (in) | 0.098 |
| Nozzle Size (mm) | 2.5 |
| Outlet Block Length (in) | 2.4 |
| Outlet Block Length (mm) | 60 |
| RTD Type | 100 OHM - Platinum |
| Solenoid Valve Voltage Rating (V dc) | 24 |
| Weight (kg) | 1.1 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
