The G-Chem series pumps are ideal for chemical injection applications. Built from the same quality standards as other Graco chemical injection pumps, they have the lowest out-of-pocket cost, are easy to operate and far exceed the performance of similar pumps of its class. The DC operated pumps can also be combined with accessories for full solar-operated systems.
Ease of Serviceability
- Easy access to the pump plunger and packings
- Plunger packings can be replaced in 10 minutes or less
- Three defined stroke adjustment positions
Robust and Simple Design
- Adjustable fluid packing lasts longer than non-adjustable seals
- Offered with ChromexTM coated plungers and SST fluid section/wetted parts
- Proprietary poppet style check valve eliminates valve from sticking
- Same high quality drive train used on other Graco chemical injection pumps
Harrier EZ Timer
- Preset built-in low voltage disconnect
- Voltage reading and display
- Prime Mode
- Built-in On/Off switch
UPC Product: 00755652629580
Family Code: FAMOCD
Unit of Measure: EA
Height: 14 IN | 35.56 CM
Length: 53.34 CM | 21 IN
Width: 20 IN | 50.8 CM
Volume: 3.403 FT3 | .096 M3
Chargeable Weight: 35.422 LBS | 16.06 KG
Technical Specifications
| Type | Electric Chemical Pump |
|---|---|
| Application | Hazardous Location |
| Fluid Inlet Size (in) | 0.25 |
| Fluid Inlet Thread Gender | Male |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (cm) | 6.35 |
| Fluid Outlet Size (in) | 0.25 |
| Fluid Outlet Size (mm) | 0.635 |
| Fluid Outlet Thread Gender | Male |
| Fluid Outlet Thread Type | NPT |
| Includes | ????, Duplex Plug, Duplex Plug, Prise duplex, Conector d?plex, Duplex-Stecker, Duplex-stekker |
| Maximum Working Pressure (bar) | 172 |
| Maximum Working Pressure (kPa) | 17200 |
| Maximum Working Pressure (psi) | 2500 |
| Motor Type | Ordinary Location |
| Plunger Material | HNBR, HNBR, HNBR, HNBR, HNBR, HNBR, HNBR |
| Plunger Size (in) | 1/4 |
| Power Rating (HP) | 0.167 |
| Seal Material | HNBR |
| Voltage (V dc) | 12 |
| Voltage | 12 VDC |
| Number of Fluid Heads | 2 |
| Plunger Rod Coating | Chromex |
| Maximum Working Pressure (MPa) | 17.2 |
| Fluid Inlet Size (cm) | 0.635 |
| Fluid Inlet Size (mm) | 6.35 |
| Maximum Sound Pressure Level (dB(A)) | 70 |
| Model | G-Chem |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
