Lincoln SL-32 Grease Injector
- For single-line, high-pressure central lubrication system
- For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2
- Output is externally adjustable
- Indicator stem permits visual check of injector operation
- May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11
- Individual injectors can be easily removed for inspection or replacement
- Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel
Notes:
- Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing - 1/8" O.D. as standard. Other outlet connectors for feed line optional
- Injectors with manifolds include two mounting clips and screws
- Injectors have Nitrile packings (200?F max./93?C). Check packing compatibility with synthetic lubricants
- Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn
| Model No. | 83336-1 |
| Brand | Lincoln |
| Output Minimum | .001 cu. in./.016 cc. |
| Output Maximum | .008 cu. in./.131 cc |
| Operating Pressure Minimum | 1200 psi/83 bar |
| Operating Pressure Maximum | 3500 psi/241 bar |
| Operating Pressure Typical | 1500 psi/103 bar |
| Operating Pressure Vent | 200 psi/14 bar |
| Stainless Steel (304) | 83724-1 |
| Number of Outlets | 1 |
| Connections Manifold Inlet | 1/4" NPTF (f) |
| Connections Injector Outlet | 1/8" O.D. Tube |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
