Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 SP is designed with one M12 input to work with a proximity, very simple to program and includes one adjustable pump element?standard, plus room for two more.
Features
- Built-in controller to monitor cycles and dictate time between lube events
- Low level indicator provides low warning and shut-down alarm
- Manual run initiates lube cycle on-demand
- Password protection safeguards settings
Specifications
UPC Product: 00755652411376
Family Code: FAMMPM
Unit of Measure: EA
Height: 15.5 IN | 39.37 CM
Length: 12 IN | 30.48 CM
Width: 25.4 CM | 10 IN
Volume: 1.076 FT3 | .03 M3
Chargeable Weight: 12.8 LBS | 5.81 KG
Technical Specifications
| Type | Electric Piston Pump |
|---|---|
| Application | On-Road Vehicles, Off-Road Equipment |
| Compatible Material | Grease |
| Fluid Outlet Size (in) | 0.25 |
| Fluid Outlet Size (mm) | 6.3500 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPSF |
| For Use With | ?????, ???????????, Series Progressive Systems, Sistemas de serie progresiva |
| Includes | ????????, ?????????????, Low Level with Controller, Nivel bajo con controlador, ??, ????, Alarm, alarma |
| Maximum NLGI Grade | #2 |
| Maximum Working Pressure (bar) | 351.6 |
| Maximum Working Pressure (kPa) | 35160 |
| Maximum Working Pressure (psi) | 5100 |
| Model | G3 |
| Power Type | Electric |
| Reservoir Size (gal) | 0.528 |
| Reservoir Size (L) | 2 |
| Series | SP |
| Voltage (V dc) | 12 |
| Weight (lb) | 13.3 |
| Wetted Material | Nylon, Trogamid T5004-060, Zinc-Plated Steel, Carbon Steel, Alloy Steel, Stainless Steel, Nitrile Rubber, Bronze, Nickel Plated Alnico, Chemically Lubricated Acetal, Aluminum, PTFE, Grillamid |
| Alarm Relay Inductive Maximum Operating Current (A) | 1.5 |
| Alarm Relay Inductive Maximum Operating Voltage (VDC) | 220 |
| Alarm Relay Inductive Maximum Switching Capacity | 25 VA;30 W |
| Alarm Relay Inductive Minimum Permissible Load | 10 ?A;10m VDC |
| Alarm Relay Inductive Rated Load (A) | 1 |
| Alarm Relay Resistive Maximum Operating Current (A) | 3 |
| Alarm Relay Resistive Maximum Switching Capacity | 50 VA;60 W |
| Alarm Relay Resistive Minimum Permissible Load | 10 ?A;10m VDC |
| Alarm Relay Resistive Rated Load (A) | 2 |
| Compatible Metering Device | Series Progressive |
| Control Options | Series Progressive |
| Input Cycle Rate (Hz) | 8 |
| Input Impedance | 1.1 |
| Input Load Current (mA @ 12 VDC) | 11 |
| Input Maximum Off Current (mA) | 1 |
| Input Maximum Residual Voltage (V) | 2 |
| Input Required Switch Type | Normally Open |
| Input Response Time (ms) | 60 |
| Input Sensor Voltage (VDC) | 12 |
| IP Rating | IP69K |
| Low Level Carry Current (A) | 1.2 |
| Low Level Contact Rating (W) | 10 |
| Low Level Switch Rating (VDC) | 200 |
| Low Level Switching Current (A) | 0.5 |
| Maximum Fill Inlet Pressure (bar) | 344.7 |
| Maximum Fill Inlet Pressure (kPa) | 34470 |
| Maximum Fill Inlet Pressure (psi) | 5000 |
| Maximum Run Time (min) | 30 |
| Maximum Voltage (V dc) | 16 |
| Minimum Voltage (V dc) | 9 |
| Number of Machine Count Sensor Inputs | 1 |
| Number of Pressure and Cycle Sensor Inputs | 3 |
| Number of Pump Elements | Up to 3 |
| Number of Sensor Inputs | 1 |
| Overall Depth (cm) | 22.9 |
| Overall Depth (in) | 9 |
| Overall Depth (mm) | 229 |
| Overall Height (cm) | 33.7 |
| Overall Height (in) | 13.25 |
| Overall Height (mm) | 337 |
| Overall Width (cm) | 20.3 |
| Overall Width (in) | 8 |
| Overall Width (mm) | 203 |
| Power Connection Type | CPC |
| Pump Output with 0 Spacers (cu in/min) | 0.25 |
| Pump Output with 1 Spacer (cu in/min) | 0.18 |
| Pump Output with 2 Spacers (cu in/min) | 0.12 |
| Vent Valve Maximum Operating Current (A) | 2 |
| Vent Valve Maximum Operating Power (W) | 48 |
| Vent Valve Output Voltage (VDC) | 12 |
| Voltage (V) | 12 VDC |
| Weight (kg) | 6 |
| Maximum Working Pressure (MPa) | 35.1 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
![BERKSHIRE ESUPPLY ProCut AL522042 21/32" Diax18" OAL Surface Treated HSS XL Taper SH Drill](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0033627_02.jpg "BERKSHIRE ESUPPLY ProCut AL522042 21/32" Diax18" OAL Surface Treated HSS XL Taper SH Drill")
![BERKSHIRE ESUPPLY ProCut AL532042 21/32" Diax24" OAL Surface Treated HSS XL Taper SH Drill](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0033685_02.jpg "BERKSHIRE ESUPPLY ProCut AL532042 21/32" Diax24" OAL Surface Treated HSS XL Taper SH Drill")
![BERKSHIRE ESUPPLY Morse Cutting Tools MT2143549 21/32"x5/8"x15/8"x33/4" 4 Flute Single End HSS Finishing Non Center Cutting End Mill Uncoated Series/List #1897](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0098209_02.jpg "BERKSHIRE ESUPPLY Morse Cutting Tools MT2143549 21/32"x5/8"x15/8"x33/4" 4 Flute Single End HSS Finishing Non Center Cutting End Mill Uncoated Series/List #1897")
![BERKSHIRE ESUPPLY M A Ford AX2702322 21/32" Dia.x45/64" Shankx2 1/2" Flute Lengthx4 13/16" OAL, 142?, AlTiN, 2 Flute, External Coolant, Round Solid Carbide Drill](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0035637_02.jpg "BERKSHIRE ESUPPLY M A Ford AX2702322 21/32" Dia.x45/64" Shankx2 1/2" Flute Lengthx4 13/16" OAL, 142?, AlTiN, 2 Flute, External Coolant, Round Solid Carbide Drill")
![BERKSHIRE ESUPPLY M A Ford AX3522932 21/32" Dia.x21/32" Shankx3 5/8" Flute Lengthx5 1/2" OAL, 5xD, 150?, Uncoated, 3 Flute, External Coolant, Round Solid Carbide Drill](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0035841_02.jpg "BERKSHIRE ESUPPLY M A Ford AX3522932 21/32" Dia.x21/32" Shankx3 5/8" Flute Lengthx5 1/2" OAL, 5xD, 150?, Uncoated, 3 Flute, External Coolant, Round Solid Carbide Drill")
