Annovi Reverberi AR XWP65.12N horizontal gas engine triplex plunger pump is rated up to 17.2 GPM at max 1740 PSI spins a 24mm solid shaft at 1450 RPM using a 1? inlet and 1?2? discharge thread. N version with a gas engine flange.
Annovi Reverberi XWP65.12N triplex plunger pump spins at 1,450 RPM at 17.2 GPM max, 24MM solid shaft and 1" inlet thread was developed with improvements to the wet end while maintaining the drive of the XW, and upgrading flow rate performance. The larger-size pistons are now ceramic, while the new water seals and valves enable this compact pump to achieve higher flow rates with virtually the same external dimensions.
| Max GPM | 17.2 |
| Max L/Min | 65 |
| Max PSI | 1740 |
| MaxBar | 120 |
| Power EBHP | 21 |
| Bore Dia mm | 30 |
| Stroke mm | 21 |
| Crankshaft ID Stamp | 7 |
| Inlet | 1" |
| Outlet | 1/2" |
| Max Temp | 140? F |
| Oil Capacity (oz) | 31.8 |
| Weight | 39 |
| RPM | 1450 |
| Shaft Size | 24MM |
| Shaft Version | N Version |
| Shaft Type | Solid |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
