The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
UPC Product: 00633955933569
Family Code: FAMAOD
Unit of Measure: EA
Height: 0 IN | 0 CM
Length: 0 IN | 0 CM
Width: 0 IN | 0 CM
Volume: 0 FT3 | 0 M3
Chargeable Weight: 32 LBS | 14.51 KG
Technical Specifications
| Application | Industrial |
|---|---|
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Fluid Inlet Size (cm) | 1.9050 |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Size (mm) | 19.05 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (cm) | 1.905 |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Size (mm) | 19.05 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Includes | ????, ??????, Bung Base, Base de tap?n, ?? ???, ????, ??????????, Stainless Steel Tube, tubo de acero inoxidable, ?????? ?? |
| Inlet Size (cm) | 0.635 |
| Inlet Size (in) | 1/4 |
| Inlet Size (mm) | 6.35 |
| Inlet Thread Gender | Female |
| Inlet Thread Type | NPT |
| Material | Stainless Steel |
| Maximum Air Pressure (bar) | 7 |
| Maximum Air Pressure (kPa) | 70 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 14 |
| Maximum Fluid Pressure (bar) | 7 |
| Maximum Fluid Pressure (kPa) | 70 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (?F) | 225 |
| Maximum Solid Size (cm) | 0.2388 |
| Maximum Solid Size (in) | 0.094 |
| Maximum Solid Size (mm) | 2.3876 |
| Motor Type | Pneumatic |
| Number of Pieces | 2 |
| Series | 716 |
| Type | Pneumatic Diaphragm Pump Package |
| Manifold Configuration | Split Port |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Diaphragm Material | PTFE |
| Ball Material | PTFE |
| Model | Husky |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
