26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station
230 V (AC), 3 Phase, 60 Hz
- Metal Finishing Station offers a wet filtration system to capture potentially combustible filings and dust in an air/water mixing zone. Also offers convenient disposal of slurry. Greatly decreases potential flammability of work area, when removing material from volatile substances.
- 36" (914 mm) Wide x 26" (660 mm) Deep work surface. Unique tabletop design not offered by other manufacturers. Can be placed on cart for transportability to every work station. Accepts 10" (254) Dual Wheel Grinder/Buffer.
- Water level view port allows operator to set initial water level and monitor level for adjustment. Water reservoir and float valve automatically compensate for water evaporation during use.
- Internal compartments are accessed with no tools required. Includes electric light for enhanced visibility.
- Transparent debris shield available. Stainless steel construction. No paper filters to replace. Grated work surface. Powder coat finish. GFI protection.
| Amps [A] | 3 |
|---|---|
| Frequency [Hz] | 60 |
| hp | 1.0 |
| Voltage | 230 |
| Voltage Hz | 230 | 60 |
| Capacity [gal] | 25.0 |
| Air Flow Particle [CFM] | 1,000 |
| Depth [inches] | 45.0 |
| Certification | UL |
| Duty | Station |
| Width | 53.0 |
| Length | 48.0 |
| Height | 46.0 |
| CE Certified | No |
| EAC Certified | No |
| Item Weight [pounds] | 364 |
| Mobility | Stationary |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
