Lincoln® SL-1 Single Grease Injector
- For single-line, high-pressure central lubrication system
- For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2
- Output is externally adjustable
- Indicator stem permits visual check of injector operation
- May be combined in a circuit of injectors SL-32, S-33, SL-V, SL-V XL and/or SL-11
- Individual injectors can be easily removed for inspection or replacement
- Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel
Notes:
- Injector manifolds have 13/32" (10.3mm) dia. mounting holes for 3/8" bolt
- Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants
- Injector rated for 350?F (176?C) max. ambient temperature, depending on lubricant used
- Injectors include fitting for filling feedlines via alternate outlet port
- Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn
| Model No. | 81713 |
| Brand | Lincoln |
| Output Minimum | .008 cu. in./.131 cc |
| Output Maximum | .080 cu. in. 1.31 cc. |
| Operating Pressure Minimum | 1850 psi/127 bar |
| Operating Pressure Maximum | 3500 psi/241 bar |
| Operating Pressure Typical | 2500 psi/172 bar |
| Operating Pressure Vent | 600 psi/41 bar |
| Connections Manifold Inlet | 3/8" NPTF (f) |
| Connections Injector Outlet | 1/8" NPTF (f) |
| Dimensions | Single injector/no manifold, [3/8" NPTF (m) inlet] |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
