The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
| Air Exhaust Port Size (in) | 3/8 |
|---|---|
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | 316 Stainless Steel |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Connection Type | Threaded |
| Diaphragm Material | Santoprene |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | Stainless Steel |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | Stainless Steel |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 16 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (?F) | 225 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (?F) | 40 |
| Overall Height (in) | 10.43 |
| Power Source | Air |
| Seat Material | Stainless Steel |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 18 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
![BERKSHIRE ESUPPLY Surf Pro SP10B12018180A 1/2"x18" 180 Grit Aluminum Oxide Coated Abrasive Belt](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0131540_02.jpg "BERKSHIRE ESUPPLY Surf Pro SP10B12018180A 1/2"x18" 180 Grit Aluminum Oxide Coated Abrasive Belt")
![BERKSHIRE ESUPPLY Klingspor MM44025220 1/2"x18" 220 Grit Aluminum Oxide Abrasive Belt](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0095072_02.jpg "BERKSHIRE ESUPPLY Klingspor MM44025220 1/2"x18" 220 Grit Aluminum Oxide Abrasive Belt")
![BERKSHIRE ESUPPLY Surf Pro SP10B12018220A 1/2"x18" 220 Grit Aluminum Oxide Coated Abrasive Belt](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0110519_02.jpg "BERKSHIRE ESUPPLY Surf Pro SP10B12018220A 1/2"x18" 220 Grit Aluminum Oxide Coated Abrasive Belt")
![BERKSHIRE ESUPPLY Klingspor MM4402540 1/2"x18" 40 Grit Aluminum Oxide Abrasive Belt](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0095073_02.jpg "BERKSHIRE ESUPPLY Klingspor MM4402540 1/2"x18" 40 Grit Aluminum Oxide Abrasive Belt")
![BERKSHIRE ESUPPLY Surf Pro SP10B12018040A 1/2"x18" 40 Grit Aluminum Oxide Coated Abrasive Belt](https://cdn.shopify.com/s/files/1/0585/4419/3741/products/0110513_02.jpg "BERKSHIRE ESUPPLY Surf Pro SP10B12018040A 1/2"x18" 40 Grit Aluminum Oxide Coated Abrasive Belt")
