Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.
Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
Many different connection options to meet your specific needs
UPC Product: 00633955362765
Family Code: FAMQFP
Unit of Measure: EA
Height: 1.3 IN | 3.302 CM
Length: 12.35 IN | 31.369 CM
Width: 8.6 IN | 21.844 CM
Volume: .08 FT3 | .002 M3
Chargeable Weight: 0.832 LBS | 0.378 KG
Technical Specifications
| Handle Type | Lever |
|---|---|
| Inlet Size (cm) | 0.9525 |
| Inlet Size (in) | 3/8 |
| Inlet Size (mm) | 9.525 |
| Inlet Thread Type | NPT |
| Maximum Working Pressure (bar) | 34 |
| Maximum Working Pressure (kPa) | 3400 |
| Maximum Working Pressure (psi) | 500 |
| Outlet Size (cm) | 0.635 |
| Outlet Size (in) | 1/4 |
| Outlet Size (mm) | 6.35 |
| Outlet Thread Gender | Male |
| Outlet Thread Type | NPT |
| Seal Material | PTFE |
| Type | Ball Valve |
| Valve Type | Two Way |
| Maximum Working Pressure (MPa) | 3.4 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
