Product Description
Plastic body panels, spoilers and ground effects; excellent for cab extenders and other surfacesFeatures
- High strength urethane structural adhesive
- Provides enough work time for bonding large body panels
- Non-sag - remains in position when applied on vertical or overhead surfaces; easy to apply
- OEM approvals: GM plastic bonding per GM6448G aftermarket spec
- Convenient provides enough work time for bonding large primed metal or plastic parts
Specifications
| Part No. | 90960 |
|---|---|
| Product Line | FUS |
| Standard/Approvals | OEM Approved | GHS Hazard |
| Application | For use on plastic body panels, spoilers and ground effects, excellent for cab extenders, glass, wood and other surfaces |
| Manufacturer | LORD Fusor Adhesives |
| Alternate Part Number-1 | 90960 |
| UPC | 666233909604 |
| Brand | Fusor® |
| Part Status | A |
| Applicable Materials | Carbon Fiber, Fiberglass, Metton, Other Plastic, SMC |
| Composition | 15 to 20% 4,4'-Diphenylmethane Diisocyanate, 10 to 15% Aromatic Polyisocyanate, 5 to 10% Diphenylmethane Diisocyanate, 10 to 15% 1,4-Butanediol, 5 to 10% Titanium Dioxide, 1 to 5% Amide, 0.1 to 0.9% 8-Hydroxy Quinoline |
| Application Time | 50 to 60 min at 70 deg F |
| Component | 2K |
| Color | Brown |
| Setting Time | 4 to 5 hr at 70 deg F, 30 min at 180 deg F |
| Flash Point | 201 deg F |
| Container Size (oz) | 7.1 |
| Container Type | Cartridge |
| Form | Liquid |
| Type | Slow Structural |
| Curing Time | 4 hr at 70 deg F, 30 min at 180 deg F |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
