Tiger Beam Anchors are used as connectors for personal fall arrest systems. They are designed to be attached to Horizontal I-Beams with an attached personal fall arrest system (full body safety harness, shock absorbing lanyard or fall arrest block). The Tiger single jaw sliding clamp can also be attached to Vertical I-Beams (see model TYAA14).
These units meet the requirements of EN 795:2012/B and ANSI/ASSE Z359.1-2007 and are CE Certified - CE 1019.
Features & benefits:
? Anchorage connectors for personal fall arrest systems.
? Quick and versatile anchorage point for personal fall protection equipment.
? Unit weight from 1.9kg ? 2.5kg.
? Minimum Breaking Strength 22.3 kN (5,000 lb/2.27 tonne).
? Beam width ranges 2.5" to 24", 6.35cm to 60cm.Brand: ![""]("https://cdn.shopify.com/s/files/1/0325/1227/8664/files/tiger_logo_480x480.jpg?v=1657527224")
Model: TYAA19 Origin: United Kingdom Minimum Breaking Strength: 22.3 kN (5,000 lb/2.27 tonne) Beam flange size options: From 2.5 up to 12 inch (63.5 - 300mm)
From 2.5 up to 18 inch (63.5 - 450mm)
From 2.5 up to 24 inch (63.5 - 600mm)Capacity: 140kg Documentation: UKCA / CE Mark where required and with Certification Specification sheet:
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
