22089 Blocstop BS/BSO 500 automatic overspeed braking system, 5/16 in. ( wire rope, 1,500 lb.
Blocstop® BSO
The Blocstop® BSO is an automatic, fall-arrest secondary safety device which is fitted to the wire rope of a Tirfor®/Griphoist® or Tirak® hoist.
The Blocstop® BSO protects against hoist failure and, if mounted on a separate safety wire rope, against suspension wire rope failure.
The Blocstop® BSO is suitable to hold or restrain any loads during lifting and pulling applications.
When in overspeed, the Blocstop® BSO automatically engages and locks on wire rope. The BS/BSO for double rope suspension provides a locking device for the primary and secondary wire ropes.
FEATURES
- Capacities: 1,500, 2,200, 4,400 or 6,600 lb. (680, 1,000, 2,000 or 3,000 kg)
APPLICATIONS
- Mounted on a secondary wire rope, the Blocstop® holds the load safely should there be any defect in the primary suspension wire rope or failure of the lifting device
- Mounted on the suspension or tensioned wire rope, the Blocstop® protects the load against failure of the primary lifting/tensioning device
- Mounted on warehouse overhead doors, to securely hold the door open and will also prevent the door from closing too fast when overspeed conditions are detected
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
